SUMMARY: Need slot assignments for SCSI-3 cards in 4/470 cardcage

From: Angela Thomas Hoynowski (angela@everest.tandem.com)
Date: Thu Dec 19 1991 - 20:29:37 CST


I mistakenly put 4/470 in the Subject (I have the 4/470 docs), but some
kind soul did send out the 4/370 info I wanted. Below is the mail
regarding the 4/370 and after that the mail I got regarding the 4/470.

-- 4/370 info --
From: caxwgk@pki-nbg.philips.de (Wolfgang Kuehnel )

Unlike the subject reads this is for a 4/370 from the field engenieer
handbook.

Here it goes:

                            1 1
        1 2 3 4 5 6 7 8 9 0 1 2
-------------------------------
SCSI A B C D E F G H

Generally:
Put the boards in the following order:
TAAC
MCP
ALM
SunLink
SCSI
2nd Ether
Xylocgics
IPI

The more interrupts the board produce, (the less "clever" the are) the closer
to the CPU.

And: Pull both jumpers on the backplane of the slot you installed a SCSI..

Wolfgang

-- 4/470 info --
From: clive@jtsv16.jts.com (Clive Beddall )

Yo Angela,

SCSI Board slots
--------------------------------------------------------------------------
1st Sun-3 Scsi 1 2 3 4 5 6 7 8 9 10 11 12
--------------------------------------------------------------------------
                                       A B C D E F G
--------------------------------------------------------------------------
2nd Sun-3 Scsi 1 2 3 4 5 6 7 8 9 10 11 12
--------------------------------------------------------------------------
                                          A B C D E F
--------------------------------------------------------------------------

Hope this helps...

Clive



This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:06:21 CDT