Summary: Telebit T1600 Configuration

From: steve@icad.COM
Date: Fri Jan 03 1992 - 22:13:16 CST


Many thanks to all respondents, in particular:

rosa@huggins.ssctr.bcm.tm
hardt@marble.den.mmc.com
fabrice@sj.ate.slb.com
dlong@cats.UCSC.EDU
wallen@cogsci.UCSD.EDU
iacovou@tera.cs.umn.edu
amp19263@garfield.amp.com
acc!steve@sacto.West.Sun

Since this has been discussed several times before I will not
waste the bandwidth and recap it here. Once I had the modem
settings correct everything worked as expected. If anyone needs further
assistance please let me know and I will gladly forward a summary.

[Original Message]
> I've been asked to upgrade a Ventel 2400 baud modem to a Telebit T1600
> on our Sun 3/260 running SunOS 4.1.1. The modem is attached to ttyb.
> I've updated all the configuration files as indicated below and sent a
> SIGHUP to init but when I try to tip cua1 I get an "all ports busy"
> message. I tried using ttysoftcar but it never returned. Has anybody else
> had to install a T1600? What am I missing?
>
>
> /etc/ttytab entry
>
> ttyd1 "/usr/etc/getty std.9600" dialup on # The Telebit T1600
>
> /etc/gettytab
>
> 2|std.9600|9600-baud:\
> :sp#9600:
>
> /etc/remote
>
> cua1|T1600:dv=/dev/cua1:br#9600
>

  Steve Carr Internet: steve@icad.com
  Icad, Inc. Phone : (617) 349-3644 Ext 247
  201 Broadway
  Cambridge, MA 02139



This archive was generated by hypermail 2.1.2 : Fri Sep 28 2001 - 23:06:33 CDT