Here's the pinout. Thanks to all of the people who responded: kevin graham <kgraham@dotnetdotcom.org> Richard Zoch <richard.zoch@ci2i.org> Tony Urban <tony.urban@bluesuit.com> Michael Auria <mha@adaclabs.com> "Wilson, Jeff D." <Jeff.D.Wilson@Williams.com> Guy Middleton <guy@certaintysolutions.com> Darren Dunham <ddunham@taos.com> "Trevor Paquette" <Trevor.Paquette@TeraGo.ca> And here's what Jeff sent, good for archival reference: It's on page 6-8 of the Netra T1 AC200 and DC200 Server User's Guide or page 56 of the Netra t1 User and Administration Guide. Here's the pinout listing (best viewed with monospace font) Serial Port (RJ45) 9-pin connector Pin 1 (RTS) Pin 8 (CTS) Pin 2 (DTR) Pin 6 (DSR) Pin 3 (TXD) Pin 2 (RXD) Pin 4 (Ground) Pin 5 (Ground) Pin 5 (Ground) Pin 5 (Ground) Pin 6 (RXD) Pin 3 (TXD) Pin 7 (DSR) Pin 4 (DTR) Pin 8 (CTS) Pin 7 (RTS) Pin assignment on RJ45 serial port _when_viewed_from_rear of Netra t1 system, pin 1 of RJ4 serial port is on the left, pin 8 on the right. ____________ 1 | |||||||| | 8 | | --|____|-- Bill -- Bill Bradford mrbill@mrbill.net Austin, TXReceived on Wed Apr 25 00:06:53 2001
This archive was generated by hypermail 2.1.8 : Wed Mar 23 2016 - 16:24:53 EDT