SUMMARY: Netra t1 200 prom and jumpstart problems

I FINALLY just got this resolved..

The problem was traced to a corrupted /etc/path_to_inst file.
I removed all entries in /etc/path_to_inst that was not a disk,
dropped to prom mode, at the ok prompt typed boot -r, which
recreated the /etc/path_to_inst file and all is now working
as expected.

This also fixed a problem with all of our t1 200's not being able
to boot without a console.

Hope this information helps someone else.


> -----Original Message-----
> From: sunmanagers-admin@sunmanagers.org
> [mailto:sunmanagers-admin@sunmanagers.org]On Behalf Of Trevor Paquette
> Sent: Friday, April 06, 2001 3:28 PM
> To: sunmanagers@sunmanagers.org
> Subject: Netra t1 200 prom and jumpstart problems
> 
> 
> I've been trying to get jumpstart working with our
> new Netra t1 200s (all 4 of them..) and on each one
> I am seeing the same errors.
> 
> 1) LOM mode is totally screwed.
>    if I use the #. escape sequence on the console to
>    drop to LOM mode, the ONLY key that now works is break.
>    All other keys do not work anymore.
> 
> 2) Prom mode is outputting lines in linefeed mode, not
>    CR mode. Makes reading the screen very hard. Instead
>    of doing a CR/LF the system is just doing a LF.
> 
> Trev
> 
> --
> 
> Trevor Paquette          |TeraGo Networks Inc.  |Work:(403)668-5321
> Trevor.Paquette@TeraGo.ca|300, 300 Manning Rd NE| Fax:(403)668-5344
> Lead Systems Architect   |Calgary, AB, Canada   |
> http://www.terago.ca     |       T2E 4K8        |
> 
> 
> _______________________________________________
> sunmanagers mailing list
> sunmanagers@sunmanagers.org
> http://www.sunmanagers.org/mailman/listinfo/sunmanagers
> 
>