SUMMARY: Moving disks between machines

From: Dave Weis <djweis_at_sjdjweis.com>
Date: Fri Jan 18 2002 - 09:19:49 EST
Many thanks to the following people:
Heilke, Rainer
Bill Voight
Briscoe, Kris
Caparroso, Nelson
Jonathan A. Zdziar
Jonas Blberg
Andrew_Rotramel

There wasn't a complete consensus, but almost everyone agreed that I could
work. I looked at the physical path for disk 0 on both machines and they
were the same. In addition, the bootblk for both machines seemed to be the
same file. 

I won't be able to try it until I get my E450 rackmount kit, but I'm
confident that it will work.

Thanks for the help!

dave


On Mon, 14 Jan 2002, Dave Weis wrote:
> I have an E250 with two internal drives that I would like to replace with
> an E450. Would everything work correctly to pull the drives, put them in
> the E450, boot from cdrom, and then run installboot again? What would the
> correct installboot incantation be for something like that?

-- 
Dave Weis             "I believe there are more instances of the abridgement
djweis@sjdjweis.com   of the freedom of the people by gradual and silent
                      encroachments of those in power than by violent 
                      and sudden usurpations."- James Madison
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
Received on Fri Jan 18 08:18:18 2002

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:32 EST