SUMMARY: set eri interface to 100/full

From: Marcus Groff <mgroff_at_genuity.com>
Date: Wed Feb 13 2002 - 13:22:09 EST
Thank you to all who responded...

Here are the appropriate lines(I was using the correct ones...just needed a 
sanity check):
set eri:adv_autoneg_cap=0
set eri:adv_100T4_cap=0
set eri:adv_100fdx_cap=1
set eri:adv_100hdx_cap=0
set eri:adv_10fdx_cap=0
set eri:adv_10hdx_cap=0

As it turns out, there was a bug with our Jumpstart image which was causing 
the issue.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
Received on Wed Feb 13 12:23:35 2002

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:34 EST