SUMMARY: Jumpstart fatal system

From: Colin Haffenden <chaffend_at_msxi-euro.com>
Date: Thu Oct 31 2002 - 04:02:04 EST
Thanks to..

Matthew Darcy
Julie Peers
Umesh Potbhare
Zaigui Wang

Especially Matthew for his on going help and Julie for solving the
problem.

############################################
Hi Colin
When your jumpstart calls for a boot device -normally c0t0d0s2
You will see on screen
You must ensure c0t0d0s2 resides in machine otherwise fatal error
occurs.
Boot your system to single user and run format and see what number disk
is 
Could be c1t0d0s2-that could be the error
Come back if still confused
Regards
Julie
############################################

Soloution....

I added another disk to make sure that hardware path c0t0d0s2 was
taken. I then re-tried the boot net - install and got the following
error...

fatal system fault:

WARNING: Uncorrectable ECC Memory Error

WARNING: Uncorrected SIMM at: J0303

	Physical Address = (ASI:0x0)0x4000000
Watchdog Reset

I replaced the memory and it is now working.
############################################

Some useful things to check from Matt....

thats a good way of doing it - that works to adding the mac to host
name and
then the hostname to ip in the same way hostname.hme0 sets the ip for
hme0.

I still think the problem is to do with the client not seeing the boot
image.

I am thinking..........but stuck at this minute, its hard with out a
jumpstart server infront of me.


-----Original Message-----
From: Colin Haffenden [mailto:chaffend@msxi-euro.com] 
Sent: Wednesday, October 30, 2002 4:42 PM
To: matthew.darcy@hp.com 
Subject: RE: Jumpstart fatal system


Hi Matt,

According to the sun blueprints by adding the ip address and hostname
to /etc/hosts and mac address and hostname to /etc/ethers the
add_install_client script will use these files to create the
/etc/bootparams file and the Jumpstart server is now configured to
supply a client with an IP Address.

I agree that getting another sparc is not a good resolution. I'm
having
trouble getting a spare anyway!


Thanks,

Colin.

>>> "DARCY,MATTHEW (HP-UnitedKingdom,ex2)" <matthew.darcy@hp.com>
10/30/02 04:18pm >>>
Hi Colin,

I think I notice something here.

I am SURE you must have a profile for your machine, ie a profile that
matches the the client name / hardware revision. this binds and IP to
mac
address, now I can't remember if this is needed to just boot the
system
or
to boot and install the system, I think it is to boot the system ie.


boot of the network, broadcasts mac address to network, jumpstart
server
picks it up and assigns an IP based on the mac address it has in its
list,
then allows it to mount the boot image, you shouldn't be able to mount
the
boot image without an IP address assigned the to mac address.

Again this is from memory so I can't remember where you set the ip
address,
I think it is in the profile.

I find it hard to believe that the response is try another sparc ????
if you
read your first message, it boots but can't see the boot image so trys
to
reboot again. This does not suggest a hardware error to me.

Matt.


-----Original Message-----
From: Colin Haffenden [mailto:chaffend@msxi-euro.com] 
Sent: Wednesday, October 30, 2002 4:10 PM
To: matthew.darcy@hp.com 
Subject: RE: Jumpstart fatal system


Matt,

No problem your help is very much appreciated, also this is the first
time I've setup jumpstart so all info is useful!

Answers to your questions...

1). add_install_client -c, This I got from the sun blueprints, also
the
man page says that it is the server.

2) Where can I find the install list?

3) Both files seem ok and have relevant info.

4) the subnet in the sysidcfg file has the same subnet (255.255.255.0)
but I haven't set the ip anywhere yet except by adding it to the
jumpstart servers host file.

5) mac address is correct

6) mounted the /jumpstart directory with no problems from another
server.

7) rebooted the machine checked all shares and still no joy. I did
notice that the add_install_client adds a share for...

/jumpstart/OS/Solaris_8_20-02/Solaris_8/Tools/Boot

I had to remove this, re-share /jumpstart and re-run
add_install_client
otherwise it gave an error say a sub directory of /jumpstart was
already
being shared.

I can't see anything relating to the client in syslog/messages.

I'm getting a few messages from people saying try another sparc. I'm
trying to "aquire" one at the moment to try that. I'll let you know
how
I get on.

Thanks,

Colin.	

>>> "DARCY,MATTHEW (HP-UnitedKingdom,ex2)" <matthew.darcy@hp.com>
10/30/02 03:24pm >>>
couple of points,

I don't have a jumpstart server at hand at this moment so a bit of
this
is
from memory so sorry if it is teaching you to suck eggs.

1.) isn't add_install_client -c the client workstation name not the
boot
server ??
2.) this isn't related to the workstation not net booting but do you
have a
sun4m install defined in your install list.
3.)manually check /etc/bootparams and /etc/ethers and make sure that
the
information matches what you expect.
4.)are you setting the client ip address that is on the same subnet as
your
jumpstart server
5.) make sure /etc/ethers has the correct client mac address.
6.) make sure NFS is working, try mounting the jumpstart share onto
the
jumpstart server via NFS for a test, ie onto /a for example
7.) make sure you have rebooted your jumpstart server AFTER you got
the
IP
conflict when you where testing earlier.

If I was at the other office I could help you with my own working
jumpstart
server but this is from memory, so hope some of its usefull.

also check the syslog / meesages to see if you can see the client
workstation doing anything on the jumpstart server ?

Matt.

-----Original Message-----
From: Colin Haffenden [mailto:chaffend@msxi-euro.com] 
Sent: Wednesday, October 30, 2002 3:15 PM
To: matthew.darcy@hp.com 
Subject: RE: Jumpstart fatal system


Tried the boot -r  and then boot net, same problem. 

the add_install_client i have done as follows....

# pwd
/jumpstart/OS/Solaris_8_20-02/Solaris_8/Tools
# ./add_install_client -c server01:/jumpstart -p server01:/jumpstart
client01 sun4m
making /tftpboot
enabling tftp in /etc/inetd.conf
updating /etc/bootparams
copying inetboot to /tftpboot

/etc/bootparams and /etc/ethers are populated and tftp is enabled in
inetd.conf.

Thanks,

Colin.
>>> "DARCY,MATTHEW (HP-UnitedKingdom,ex2)" <matthew.darcy@hp.com>
10/30/02 03:02pm >>>
do t boot -r then a boot net

the boot -r will rebuild your devices thus making sure it boots from
the
right hardware path, then boot net will just network boot it and
ignore
the
install routine - so you can just tell if your workstation is failing
on
booting the network image OR the install routine.

I am taking you have added the client to the jumpstart server with the
"add_install_client" script ??

thus making sure /etc/ethers /etc/bootparams are populated with the
client
request, and tftp is enabled in inetd ???

Is NFS running on the jumpstart server ??


Matt


-----Original Message-----
From: Colin Haffenden [mailto:chaffend@msxi-euro.com] 
Sent: Wednesday, October 30, 2002 2:55 PM
To: matthew.darcy@hp.com 
Subject: RE: Jumpstart fatal system


Matthew,

I shared my /jumpstart directory with the following command...

# share -F nfs -o ro,anon=0 -d "Jumpstart Directory" /jumpstart
# shareall

I have been following the jumpstart sun blueprint.

Also the client used to have the same ip address as my jumpstart
server. When it boots I get an ip address conflict so it looks like my
crossover connection is ok...

Any more ideas?

Thanks,

Colin.
>>> "DARCY,MATTHEW (HP-UnitedKingdom,ex2)" <matthew.darcy@hp.com>
10/30/02 02:50pm >>>

looks like it can't see your boot server.

do you have the boot images shared via nfs and are the share
permisions
set
to anonymous

############################################

Original message..

############################################
Hi, 

I am configuring and testing jumpstart for the first time. I have run
the check script and all is ok. I am using a crossover cable between 2
sparc 20's. I am using Solaris 8. When I try the command... 

ok> boot net - install 

I get the following output... 

SPARCstation 20 (1 X 390Z50), No Keyboard
ROM Rev, 2.15, 80MB memory installed, Serial #3465993.
Ethernet address 8:0:20:20:75:a, Host ID: 73234e309


Rebooting with command: net - install
Boot device: /iommu/sbus/ledma@f,200010/le@f,c00000 File and args: -
install
20c00
SunOS Release 5.8 Version Generic_108528-13 32-bit
Copyright 1983-2001 Sun Microsytems, Inc. All rights reserved.
whoami: no domain name
Configuring /dev and /devices
fatal system fault:

Watchdog Reset
Type help for more information
ok

Does anyone have any idea what this means and what I can do about it? 

Thanks in advance, 

Colin
############################################
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
Received on Thu Oct 31 04:15:45 2002

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:57 EST