Original post: > I'm considering LDC-monitors (or non-Sun CRTs). > > Does PGX64 or Expert3D-Lite frame buffers require a valid senseID > from the monitor, or is it possible to use max. resolution and refresh > rate on non-Sun monitors as well? > > When connecting non-Sun monitors to frame buffers like Creator3D, > we only get 1152x900x66Hz... > > Any recommendations on good LCD monitors for Sun (SunBlade) ? Apparently, m64config and fbconfig does the trick. I have had problems with this, some monitors does not support the same frequency as the graphics board support... Or, optionally, eprom setting: setenv output-device screen:r1024x768x66 - Nils _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagersReceived on Fri Nov 15 02:14:21 2002
This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:42:58 EST