Summary: {not solved} V240 can't see more than 1 LUN on ST3320

From: Jay Morgan <jhmnospam_at_jaymorgan.us>
Date: Tue Sep 28 2010 - 11:22:28 EDT
  Just a note to all that I was not able to resolve this issue.  Updated 
Solaris patches, updated 3320 firmware, various incantations of "cfgadm 
-c configure c4", devfsadm, edits of sd.conf and glm.conf did not solve 
the issue.  I tried two V240s, with existing and new installs of Solaris 
10, as well as booting from CD.  No joy.  Sun's documentation states 
support and compatibility.  I'm having no problem accessing all luns via 
T2000 and T5220.  I have given up and am using one of the T-series boxes 
I have.  Not ideal for what I was looking to do, but workable.

Thanks to all who attempted assistance.

Jay

On 9/23/2010 3:23 PM, Jay Morgan wrote:
>    I have a V240 connecting to a StorageTek 3320 that is having problem
> seeing the two LUNs that are defined on the array.  When I do a
> probe-scsi-all, I see
>
> /pci@1c,600000/scsi@2,1
> Target 0
>     Unit 0   Disk     SUN     StorEdge 3320   421E
>     Unit 1   Disk     SUN     StorEdge 3320   421E
>
>
> Which tells me that both LUNs are being seen from OBP.
>
> However, when I boot into Solaris 10 (tried 10/08 and 10/09, and booting
> straight from CD), I can only see 1 LUN.
>
> bash-3.00# format
> Searching for disks...done
>
>
> AVAILABLE DISK SELECTIONS:
>          0. c2t0d0<SUN146G cyl 14087 alt 2 hd 24 sec 848>
>             /pci@1c,600000/scsi@2/sd@0,0
>          1. c2t1d0<SUN146G cyl 14087 alt 2 hd 24 sec 848>
>             /pci@1c,600000/scsi@2/sd@1,0
>          2. c4t0d0<SUN-StorEdge3320-421D cyl 35073 alt 2 hd 64 sec 255>
>             /pci@1c,600000/scsi@2,1/sd@0,0
>
> devfsadm will not build device files for the second LUN.
>
> I tried building a glm.conf file with the following contents:
>
> device-type-scsi-options-list = "SUN     StorEdge 3320",
> "SE3320-scsi-options";
> SE3320-scsi-options = 0x43ff8;
>
>
> And adding the following entries to sd.conf:
>
> name="sd" class="scsi"
> target=1 lun=1;
> name="sd" class="scsi"
> target=1 lun=2;
> name="sd" class="scsi"
> target=1 lun=3;
> name="sd" class="scsi"
> target=1 lun=4;
> name="sd" class="scsi"
> target=1 lun=5;
> name="sd" class="scsi"
> target=1 lun=6;
> name="sd" class="scsi"
> target=1 lun=7;
> name="sd" class="scsi"
> target=1 lun=8;
> name="sd" class="scsi"
> target=1 lun=9;
> name="sd" class="scsi"
> target=1 lun=10;
> name="sd" class="scsi"
> target=1 lun=11;
> name="sd" class="scsi"
> target=1 lun=12;
>
> When I connect a Netra T2000 with S10 10/09 to the array, all LUNs show
> up without a problem.  I've tried two different V240s with no luck.  Any
> ideas?
> _______________________________________________
> sunmanagers mailing list
> sunmanagers@sunmanagers.org
> http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
Received on Tue Sep 28 11:23:43 2010

This archive was generated by hypermail 2.1.8 : Thu Mar 03 2016 - 06:44:17 EST