Summary: T3 Lun and Veritas-vxvm
Evans, Shawn
s.evans at TriCorInd.com
Wed Apr 2 14:15:29 EST 2003
Thank's to everyone who answered!
The short, sweet, and simple answer to my question is: You can't!
A solution provided by Sun: Switch to SDS...
---
- Shawn L. Evans -
- mailto:s.evans at tricorind.com -
- Phone: 1.618.632.9252 x247 -
-----Original Message-----
From: Evans, Shawn [mailto:s.evans at TriCorInd.com]
Sent: Tuesday, April 01, 2003 2:43 PM
To: sunmanagers at sunmanagers.org
Subject: T3 Lun and Veritas-vxvm
I am attempting to take a lun from a T3 show below and configure it within
format to have the slices shown below. Then I want to take this same disk,
and import it to Veritas, but, I only want to import slice 3 leaving 0 and 1
untouched.
Is this possable, and if so, how?
4. c4t1d0 <SUN-T300-0117 cyl 34530 alt 2 hd 32 sec 128>
/ssm at 0,0/pci at 1d,600000/pci at 1/SUNW,qlc at 4/fp at 0,0/ssd at w50020f2300007f61,0
Part Tag Flag Cylinders Size Blocks
0 usr wm 1 - 512 1024.00MB (512/0/0) 2097152
1 usr wm 513 - 1024 1024.00MB (512/0/0) 2097152
2 unassigned wu 0 0 (0/0/0) 0
3 usr wu 1025 - 1057 66.00MB (33/0/0) 135168
4 unassigned wu 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
The reason is I am attempting to 'simulate' a T3+ and slice 0 and 1 are for
SNDR.
---
- Shawn L. Evans -
- mailto:s.evans at tricorind.com -
- Phone: 1.618.632.9252 x247 -
_______________________________________________
sunmanagers mailing list
sunmanagers at sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers at sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
More information about the summaries
mailing list