Summary : Unable to compile after patch cluster

[François Legal]

 Hi all, and thanks for the answers.

I fixed the problem by myself, using some informations from SOLDC forums.

I removed the file /usr/ccs/bin/ad, and gcc is working again.

--

Frangois Legal
 

 Hi Francois
 
     I had problems on 2 servers after applying the March rec patch
cluster on a 2.6
 platform. The problem for me was that patch 105693-13 overwrote
/etc/inet/inetd.conf
 which made some of our site-specific services. It did not save an old
copy, and there
 were no warnings or special installation instructions.
 
     Sun have now logged this issue as BugID # 4843569.
 
     If you had made changes to inetd.conf, then I suggest you restore
the file from a
 backup taken before you applied the patches.
 
     If this fixes your problem, please post my reply in your summary, so
others in the
 same position may benefit.
 
 Good luck
 

 
 
 Dennis Martens
 Unix Administrator, BCISU
 Queensland Health , Brisbane Australia
 617 32340729
 Fax 32341289

 >>> Frangois Legal <flegal at seo-toulouse.com> 8/04/03 19:28:31 >>>
 Hi all.

 I'm running Solaris 2.6 with GCC 3.1
 Since I installed the last patch cluster from sun, I am unable to
 compile.
 I get the output :

 collect2: ld terminated with signal 9 [Killed], core dumped
 ld.so.1: /usr/ccs/bin/ad: fatal: libld.so.2: version `SUNWprivate_2.8'
 not found (required by file /usr/ccs/bin/ad)

 Anybody knows about that ?

 --

 Frangois Legal
 E-mail : flegal at seo-toulouse.com
_______________________________________________
sunmanagers mailing list
sunmanagers at sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers