No subject

ok setenv disk-led-assoc 0 x y
where x= 1 to 10 PCI slot where the lowest Ultrascsi cont is installed
where y= 1 to 10 PCI slot where the uppermost Ultrascsi cont is installed

For example, if ctrl cards are in slot 5 and 7 enter the following:
ok setenv disk-led-assoc 0 5 7

if there is only one ctrl installed in slot 5
ok setenv disk-led-assoc 0 5
ok reset
ok boot -r to take effect

Now run prtdiag -v

Disk LED Status:        OK = GREEN      ERROR = YELLOW
                DISK 18:    [OK]        DISK 19:    [OK]
                DISK 16:    [OK]        DISK 17:    [OK]
                DISK 14:    [OK]        DISK 15:    [OK]
                DISK 12:    [OK]        DISK 13:    [OK]
                DISK 10:    [OK]        DISK 11:    [OK]
                DISK  8:    [OK]        DISK  9:    [OK]
                DISK  6:    [OK]        DISK  7:    [OK]
                DISK  4:    [OK]        DISK  5:    [OK]
                DISK  2:    [OK]        DISK  3:    [OK]
                DISK  0:    [OK]        DISK  1:    [OK]



----------Original Post-----------
SunManagers,
    Part of my "prtdiag -v" displays:

Disk LED Status:        OK = GREEN      ERROR = YELLOW
                DISK 10: [EMPTY]        DISK 11: [EMPTY]
                DISK  8: [EMPTY]        DISK  9: [EMPTY]
                DISK  6: [EMPTY]        DISK  7: [EMPTY]
                DISK  4: [EMPTY]        DISK  5: [EMPTY]
                DISK  2:    [OK]        DISK  3:    [OK]
                DISK  0:    [OK]        DISK  1:    [OK]


>From this info I would gather I only have 4 disks in the server however,
when I run "format" it shows 9 disks.  I have 3 unused slots for disks at
this time.

AVAILABLE DISK SELECTIONS:
       0. c0t0d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
          /pci at 1f,4000/scsi at 3/sd at 0,0
       1. c0t1d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
          /pci at 1f,4000/scsi at 3/sd at 1,0
       2. c0t2d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
          /pci at 1f,4000/scsi at 3/sd at 2,0
       3. c0t3d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
          /pci at 1f,4000/scsi at 3/sd at 3,0
       4. c2t0d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
          /pci at 6,4000/scsi at 4/sd at 0,0
       5. c2t1d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
          /pci at 6,4000/scsi at 4/sd at 1,0
       6. c2t2d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
          /pci at 6,4000/scsi at 4/sd at 2,0
       7. c3t0d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
          /pci at 6,4000/scsi at 4,1/sd at 0,0
       8. c3t2d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
          /pci at 6,4000/scsi at 4,1/sd at 2,0
Specify disk (enter its number):


Why the difference? Should I be worried?  I can't seem to find any
information that explains why I would have a difference.  THanks in
advance.  Will summerize.


Randy Romero
_______________________________________________
sunmanagers mailing list
sunmanagers at sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers at sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers