No subject

>Unfortunately there is no way getting system temperatures from E420R (nor
E220R).
>They are based on Ultra80 (and Ultra60) motherboards that lack temperature
sensors
>(as they were designed for workstations). With E250 (and V880) prtdiag shows
you
>temperatures among other usefull status information. I think T1 doesn't have
>temperature sensors either, but you can monitor fans, fault-leds etc. using
LOM.

So that's that!

I did have a suggestion from Brett Lymn to get the ambient temperature from
inside the enclosure using a serial temperature monitor (e.g.
http://www.electronickits.com/kit/complete/meas/ck110.htm).  I will definately
be trying this.

For anyone who's interested, to return the temperature (plus other stuff) on
an E250, V880 etc. use:

/usr/platform/`/sbin/uname -i`/sbin/prtdiag -v

Thanks also to Amit Mahajan and Marco Santoro.

Cheers, Craig

Craig Robinson
Environmental Protection Agency
Tel: (07) 3006 4629     Fax: (07) 3247 6534
Email: craig.robinson at epa.qld.gov.au

Visit us at: http://www.epa.qld.gov.au
_______________________________________________
sunmanagers mailing list
sunmanagers at sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers