No subject

There is a way to set up a graphics head and keyboard
on a server as well as have an asci console.

Consoles by default go to the Graphics head if one
exists on a sun  server.
 The following need to be done to be able to use the
graphics head as a  normal terminal and an ASCI
terminal as the console.

    a)   Change the last line in
/usr/dt/config/Xserver   
from:     0   Local local_uid at console root 
/usr/openwin/bin/Xsun :0
    ?nobanner
to:       0   Local local_uid at none root
/usr/openwin/bin/Xsun :0 
   ?nobanner

   b)   Then Change the following prom settings
         Eeprom output-device ttya
         Eeprom input-device ttya

   c)   Use admintool to ensure that the serial port a
is set
*****************
My original question:

> Hi all,
> 
> I know to use serial port terminal console, you will
> have to disconnect keyboard.  This is a Sun
> workstation with a Cisco terminal server, no PCs, no
> Hyper Terminal.
> 
> In a situation that it absolutely needs keyboard to
> be
> connected, is it possible I still somehow have
> remote
> connection through serial port terminal console?  
HotJobs - Search Thousands of New Jobs
http://www.hotjobs.com
_______________________________________________
sunmanagers mailing list
sunmanagers at sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers