Sun 420 R Error : Using Onboard Transceiver - Timeout waiting for AutoNegotiation Status to be upda

manoj ghag manojghag at rediffmail.com
Sun Jun 12 02:20:32 EDT 2005


Hi, Managers

   I am facing a very strange problem here .... when I try to
boot my server with OK boot ... it starts giving me error...( I have freshly
installed the solaris 8 on the server .. it has installed properly .. but when
it rebooted after installation it started giving eme following errors
................. )


--------------- ERROR ----------------------------------
{0} ok boot

Boot device: net  File and args:

Using Onboard Transceiver -
Timeout waiting for AutoNegotiation Status to be updated.

Timeout reading
Link status. Check cable and try again.

Timeout waiting for AutoNegotiation
Status to be updated.

Timeout reading Link status. Check cable and try again.
Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link
status. Check cable and try again.
AutoNegotiation Timeout.
Check Cable or
Contact your System Administrator.
Link Down.
Setting up Network Link and
Speed.
Using Onboard Transceiver - Timeout waiting for AutoNegotiation Status
to be upd
ated.
Timeout reading Link status. Check cable and try again.
Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link
status. Check cable and try again.

----------------------- SYSTEM information
----------------------




{0} ok  printenv
Variable Name         Value
Default Value

scsi-initiator-id     7                              7
keyboard-click?       false                          false
keymap
ttyb-rts-dtr-off      false                          false
ttyb-ignore-cd
true                           true
ttya-rts-dtr-off      false
false
ttya-ignore-cd        true                           true
ttyb-mode
9600,8,n,1,-                   9600,8,n,1,-
ttya-mode             9600,8,n,1,-
9600,8,n,1,-
pcia-probe-list       1                              1
pcib-probe-list       1,3,2,4,5                      1,3,2,4,5
enclosure-type
540-4115-01
banner-name           Sun Enterprise 420R
energystar-enabled?
false
mfg-mode              off                            off
diag-level
min                            min
#power-cycles         36
system-board-serial#  5015168063726
system-board-date     39c3331d
fcode-debug?          false                          false
output-device
screen                         screen
input-device          keyboard
keyboard
load-base             16384                          16384
boot-command          boot                           boot
auto-boot?
false                          true
watchdog-reboot?      false
false
diag-file
diag-device           net                            net
boot-file
boot-device           disk                           disk net
local-mac-address?    false                          false
ansi-terminal?
true                           true
screen-#columns       80
80
screen-#rows          34                             34
silent-mode?
false                          false
use-nvramrc?          false
false
nvramrc
security-mode         none
security-password
security-#badlogins
0
oem-logo
oem-logo?             false                          false
oem-banner
oem-banner?           false                          false
hardware-revision
last-hardware-update
diag-switch?          true
false
{0} ok  printenv
Variable Name         Value
Default Value

scsi-initiator-id     7                              7
keyboard-click?       false                          false
keymap
ttyb-rts-dtr-off      false                          false
ttyb-ignore-cd
true                           true
ttya-rts-dtr-off      false
false
ttya-ignore-cd        true                           true
ttyb-mode
9600,8,n,1,-                   9600,8,n,1,-
ttya-mode             9600,8,n,1,-
9600,8,n,1,-
pcia-probe-list       1                              1
pcib-probe-list       1,3,2,4,5                      1,3,2,4,5
enclosure-type
540-4115-01
banner-name           Sun Enterprise 420R
energystar-enabled?
false
mfg-mode              off                            off
diag-level
min                            min
#power-cycles         36
system-board-serial#  5015168063726
system-board-date     39c3331d
fcode-debug?          false                          false
output-device
screen                         screen
input-device          keyboard
keyboard
load-base             16384                          16384
boot-command          boot                           boot
auto-boot?
false                          true
watchdog-reboot?      false
false
diag-file
diag-device           net                            net
boot-file
boot-device           disk                           disk net
local-mac-address?    false                          false
ansi-terminal?
true                           true
screen-#columns       80
80
screen-#rows          34                             34
silent-mode?
false                          false
use-nvramrc?          false
false
nvramrc
security-mode         none
security-password
security-#badlogins
0
oem-logo
oem-logo?             false                          false
oem-banner
oem-banner?           false                          false
hardware-revision
last-hardware-update
diag-switch?          true
false


{0} ok


{0} ok setenv tpe-link-test? true
Unknown option:
tpe-link-test?


{0} ok boot -r
Boot device: /pci at 1f,4000/network at 1,1  File
and args: -r
Using Onboard Transceiver - Timeout waiting for AutoNegotiation
Status to be upd
ated.
Timeout reading Link status. Check cable and try again.
Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link
status. Check cable and try again.
Timeout waiting for AutoNegotiation Status
to be updated.
Timeout reading Link status. Check cable and try again.
AutoNegotiation Timeout.
Check Cable or Contact your System Administrator.
Link Down.
Setting up Network Link and Speed.
Using Onboard Transceiver -
Timeout waiting for AutoNegotiation Status to be upd
ated.
Timeout reading
Link status. Check cable and try again.
Timeout waiting for AutoNegotiation
Status to be updated.
Timeout reading Link status. Check cable and try again.
Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link
status. Check cable and try again.
AutoNegotiation Timeout.
Check Cable or
Contact your System Administrator.
Link Down.
Network Link Setup Failed.
Please Check Cable and Try Again.
Setting up Network Link and Speed.
Using
Onboard Transceiver - Timeout waiting for AutoNegotiation Status to be upd
ated.
Timeout reading Link status. Check cable and try again.
Timeout waiting
for AutoNegotiation Status to be updated.
Timeout reading Link status. Check
cable and try again.

Hardware Power ON
Master CPU : 0000.0000.0055.11a0
Slave
CPU : 0000.0001.0055.11a0
Slave  CPU : 0000.0002.0055.11a0
Slave  CPU :
0000.0003.0055.11a0
Master  E$ : 0000.0000.0040.0000
Slave   E$ :
0000.0000.0040.0000
Slave   E$ : 0000.0000.0040.0000
Slave   E$ :
0000.0000.0040.0000

Button Power ON
Master CPU : 0000.0000.0055.11a0
Slave
CPU : 0000.0001.0055.11a0
Slave  CPU : 0000.0002.0055.11a0
Slave  CPU :
0000.0003.0055.11a0
Master  E$ : 0000.0000.0040.0000
Slave   E$ :
0000.0000.0040.0000
Slave   E$ : 0000.0000.0040.0000
Slave   E$ :
0000.0000.0040.0000

Probing keyboard Done
Executing Power On SelfTest
0>
0>@(#) Sun Ultra 80(UltraSPARC-II 4-way) UPA/PCI POST 1.2.7 05/24/1999 05:33
PM
0>INFO: Processor 0 is master. CPU 450 MHz. 4304KB Ecache.
0>
0> <00> Init
System BSS
0> <00> NVRAM Battery Detect Test
0> <00> NVRAM Scratch Addr Test
0> <00> DMMU TLB Tag Access Test
0> <00> DMMU TLB RAM Access Test
0> <00> IMMU
TLB Tag Access Test
0> <00> IMMU TLB RAM Access Test
0> <00> Probe Ecache
0>
<00> Ecache RAM Addr Test
0> <00> Ecache Tag Addr Test
0> <00> Ecache Tag Test
0> <00> Invalidate Ecache Tags
0>INFO: Processor 1 - UltraSPARC-II.
0>INFO:
Processor 2 - UltraSPARC-II.
0>INFO: Processor 3 - UltraSPARC-II.
0> <00> Init
SC Regs
0> <00> SC Address Reg Test
0> <00> SC Reg Index Test
0> <00> SC Regs
Test
0> <00> SC Dtag RAM Addr Test
0> <00> SC Cache Size Init
0> <00> SC Dtag
RAM Data Test
0> <00> SC Dtag Init
0> <00> Probe Memory
0>INFO: 1024MB Bank 0
0>INFO: 1024MB Bank 1
0>INFO: 1024MB Bank 2
0>INFO: 1024MB Bank 3
0> <00>
Malloc Post Memory
0> <00> Init Post Memory
0> <00> Post Memory Addr Test
0>
<00> Map PROM/STACK/NVRAM in DMMU
0> <00> Memory Stack Test
3> <00> DMMU TLB
Tag Access Test
1> <00> DMMU TLB Tag Access Test
2> <00> DMMU TLB Tag Access
Test
3> <00> DMMU TLB RAM Access Test
2> <00> DMMU TLB RAM Access Test
1> <00>
DMMU TLB RAM Access Test
3> <00> IMMU TLB Tag Access Test
2> <00> IMMU TLB Tag
Access Test
1> <00> IMMU TLB Tag Access Test
3> <00> IMMU TLB RAM Access Test
2> <00> IMMU TLB RAM Access Test
1> <00> IMMU TLB RAM Access Test
3> <00>
Probe Ecache
2> <00> Probe Ecache
3> <00> Ecache RAM Addr Test
2> <00> Ecache
RAM Addr Test
3> <00> Ecache Tag Addr Test
1> <00> Probe Ecache
2> <00> Ecache
Tag Addr Test
3> <00> Ecache Tag Test
1> <00> Ecache RAM Addr Test
2> <00>
Ecache Tag Test
1> <00> Ecache Tag Addr Test
1> <00> Ecache Tag Test
3> <00>
Invalidate Ecache Tags
2> <00> Invalidate Ecache Tags
1> <00> Invalidate
Ecache Tags
3> <00> Map PROM/STACK/NVRAM in DMMU
2> <00> Map PROM/STACK/NVRAM
in DMMU
3> <00> Update Slave Stack/Frame Ptrs
2> <00> Update Slave Stack/Frame
Ptrs
1> <00> Map PROM/STACK/NVRAM in DMMU
0> <00> DMMU Hit/Miss Test
1> <00>
Update Slave Stack/Frame Ptrs
0> <00> IMMU Hit/Miss Test
0> <00> DMMU Little
Endian Test
0> <00> IU ASI Access Test
0> <00> FPU ASI Access Test
3> <00>
DMMU Hit/Miss Test
1> <00> DMMU Hit/Miss Test
2> <00> DMMU Hit/Miss Test
3>
<00> IMMU Hit/Miss Test
1> <00> IMMU Hit/Miss Test
2> <00> IMMU Hit/Miss Test
3> <00> DMMU Little Endian Test
1> <00> DMMU Little Endian Test
2> <00> DMMU
Little Endian Test
3> <00> IU ASI Access Test
1> <00> IU ASI Access Test
2>
<00> IU ASI Access Test
3> <00> FPU ASI Access Test
1> <00> FPU ASI Access
Test
2> <00> FPU ASI Access Test
3> <00> Dcache RAM Test
2> <00> Dcache RAM
Test
1> <00> Dcache RAM Test
3> <00> Dcache Tag Test
2> <00> Dcache Tag Test
1> <00> Dcache Tag Test
3> <00> Icache RAM Test
2> <00> Icache RAM Test
1>
<00> Icache RAM Test
3> <00> Icache Tag Test
2> <00> Icache Tag Test
1> <00>
Icache Tag Test
3> <00> Icache Next Test
2> <00> Icache Next Test
1> <00>
Icache Next Test
3> <00> Icache Predecode Test
2> <00> Icache Predecode Test
1> <00> Icache Predecode Test
0> <1f> Init Psycho
0> <1f> PIO Read Error,
Master Abort Test
0> <1f> PIO Read Error, Target Abort Test
0> <1f> PIO Write
Error, Master Abort Test
0> <1f> PIO Write Error, Target Abort Test
0> <1f>
Timer Increment Test
0> <1f> Init Psycho
0> <1f> Pass-Thru DMA UE ECC Rd Err
Lpbk Test
0> <00> V9 Instruction Test
0> <00> CPU Tick and Tick Compare Reg
Test
0> <00> CPU Soft Trap Test
0> <00> CPU Softint Reg and Int Test
3> <00>
V9 Instruction Test
1> <00> V9 Instruction Test
2> <00> V9 Instruction Test
3>
<00> CPU Tick and Tick Compare Reg Test
1> <00> CPU Tick and Tick Compare Reg
Test
2> <00> CPU Tick and Tick Compare Reg Test
0> <00> UltraSPARC-2 Prefetch
Instructions Test
0> <00> Test 0: prefetch_mr
0> <00> Test 1: prefetch to
non-cacheable page
0> <00> Test 2: prefetch to page with dmmu misss
0> <00>
Test 3: prefetch miss does not check alignment
0> <00> Test 4: prefetcha with
asi 0x4c is noped
0> <00> Test 5: prefetcha with asi 0x54 is noped
0> <00>
Test 6: prefetcha with asi 0x6e is noped
0> <00> Test 7: prefetcha with asi
0x76 is noped
0> <00> Test 8: prefetch with fcn 5
0> <00> Test 9: prefetch
with fcn 2
0> <00> Test 10: prefetch with fcn 12
0> <00> Test 11: prefetch
with fcn 16 is noped
0> <00> Test 12: prefetch with fcn 29 is noped
0> <00>
Test 13: prefetcha with asi 0x15 is noped
0> <00> Test 14: prefetch with fcn 3
0> <00> Test 15: prefetcha14 with fcn 2
0> <00> Test 16: prefetcha80_mr
0>
<00> Test 17: prefetcha81_1r
0> <00> Test 18: prefetcha10_mw
0> <00> Test 19:
prefetcha80_17 is noped
0> <00> Test 20: prefetcha10_6: illegal instruction
trap
0> <00> Test 21: prefetcha11_1w
0> <00> Test 22: prefetcha81_31
0> <00>
Test 23: prefetcha11_15: illegal instruction trap
0>STATUS =PASSED


Power On
Selftest Completed
    Status  = 0000.0000.0000.0000 ffff.ffff.f00b.3f38
ff9f.ffff.0bd1.1111
Software Power ON
Master CPU : 0000.0000.0055.11a0
Slave
CPU : 0000.0001.0055.11a0
Slave  CPU : 0000.0002.0055.11a0
Slave  CPU :
0000.0003.0055.11a0
Master  E$ : 0000.0000.0040.0000
Slave   E$ :
0000.0000.0040.0000
Slave   E$ : 0000.0000.0040.0000
Slave   E$ :
0000.0000.0040.0000

@(#) UPA/PCI 3.23 Version 0 created 1999/06/30 13:53
Clearing DTAGS Done
Probing Memory
CONFIG   =  0000.0000.1010.1010
MEM BASE =
0000.0000.0000.0000
MEM SIZE =  0000.0001.0000.0000
MMUs ON
Copy Done
PC =
0000.01ff.f000.2a50
PC = 0000.0000.0000.2a94
Decompressing into Memory Done
Size = 0000.0000.0006.ef90
ttya initialized
SC Control: EWP:0 IAP:0 FATAL:0
WAKEUP:0 BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
Probing Memory Bank #0   1   1   1
1 :   4 Gigabytes
Probing Floppy: No drives detected
Probing EBUS Nothing
there
Probing UPA Slot at 1e,0 Nothing there
Probing UPA Slot at 1d,0 Nothing
there
Probing /pci at 1f,4000 at Device 1  pci108e,1000 network
Probing
/pci at 1f,4000 at Device 3  scsi disk tape scsi disk tape
Probing /pci at 1f,4000
at Device 2  pci
Probing /pci at 1f,4000/pci at 2 at Device 0  pci108e,1000 SUNW,qfe
Probing /pci at 1f,4000/pci at 2 at Device 1  pci108e,1000 SUNW,qfe
Probing
/pci at 1f,4000/pci at 2 at Device 2  pci108e,1000 SUNW,qfe
Probing
/pci at 1f,4000/pci at 2 at Device 3  pci108e,1000 SUNW,qfe
Probing
/pci at 1f,4000/pci at 2 at Device 4  Nothing there
Probing /pci at 1f,4000/pci at 2 at
Device 5  Nothing there
Probing /pci at 1f,4000/pci at 2 at Device 6  Nothing there
Probing /pci at 1f,4000/pci at 2 at Device 7  Nothing there
Probing
/pci at 1f,4000/pci at 2 at Device 8  Nothing there
Probing /pci at 1f,4000/pci at 2 at
Device 9  Nothing there
Probing /pci at 1f,4000/pci at 2 at Device a  Nothing there
Probing /pci at 1f,4000/pci at 2 at Device b  Nothing there
Probing
/pci at 1f,4000/pci at 2 at Device c  Nothing there
Probing /pci at 1f,4000/pci at 2 at
Device d  Nothing there
Probing /pci at 1f,4000/pci at 2 at Device e  Nothing there
Probing /pci at 1f,4000/pci at 2 at Device f  Nothing there

Probing /pci at 1f,4000 at
Device 4  TSI,gfxp
Probing /pci at 1f,4000 at Device 5  Nothing there
Probing
/pci at 1f,2000 at Device 1  scsi disk tape scsi disk tape
SC Control: EWP:0
IAP:0 FATAL:0 WAKEUP:0 BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
Probing Memory Bank
#0   1   1   1   1 :   4 Gigabytes
Probing Floppy: No drives detected
Probing
EBUS Nothing there
Probing UPA Slot at 1e,0 Nothing there
Probing UPA Slot at
1d,0 Nothing there
Probing /pci at 1f,4000 at Device 1  pci108e,1000 network
Probing /pci at 1f,4000 at Device 3  scsi disk tape scsi disk tape
Probing
/pci at 1f,4000 at Device 2  pci
Probing /pci at 1f,4000/pci at 2 at Device 0
pci108e,1000 SUNW,qfe
Probing /pci at 1f,4000/pci at 2 at Device 1  pci108e,1000
SUNW,qfe
Probing /pci at 1f,4000/pci at 2 at Device 2  pci108e,1000 SUNW,qfe
Probing
/pci at 1f,4000/pci at 2 at Device 3  pci108e,1000 SUNW,qfe
Probing
/pci at 1f,4000/pci at 2 at Device 4  Nothing there
Probing /pci at 1f,4000/pci at 2 at
Device 5  Nothing there
Probing /pci at 1f,4000/pci at 2 at Device 6  Nothing there
Probing /pci at 1f,4000/pci at 2 at Device 7  Nothing there
Probing
/pci at 1f,4000/pci at 2 at Device 8  Nothing there
Probing /pci at 1f,4000/pci at 2 at
Device 9  Nothing there
Probing /pci at 1f,4000/pci at 2 at Device a  Nothing there
Probing /pci at 1f,4000/pci at 2 at Device b  Nothing there
Probing
/pci at 1f,4000/pci at 2 at Device c  Nothing there
Probing /pci at 1f,4000/pci at 2 at
Device d  Nothing there
Probing /pci at 1f,4000/pci at 2 at Device e  Nothing there
Probing /pci at 1f,4000/pci at 2 at Device f  Nothing there

Probing /pci at 1f,4000 at
Device 4  TSI,gfxp
Probing /pci at 1f,4000 at Device 5  Nothing there
Probing
/pci at 1f,2000 at Device 1  scsi disk tape scsi disk tape

Sun Enterprise 420R
(4 X UltraSPARC-II 450MHz), No Keyboard
OpenBoot 3.23, 4096 MB memory
installed, Serial #15736329.
Ethernet address 8:0:20:f0:1e:9, Host ID:
80f01e09.




{0} ok probe-scsi-all


/pci at 1f,2000/scsi at 1,1
/pci at 1f,2000/scsi at 1

/pci at 1f,4000/scsi at 3,1

/pci at 1f,4000/scsi at 3
Target 0
Unit 0   Disk     SEAGATE ST318404LSUN18G 4207
Target 6
  Unit 0   Removable
Read Only device    TOSHIBA DVD-ROM SD-M14011007




{0} ok test-all


Testing
/pci at 1f,2000/scsi at 1,1
No targets found
Selftest failed. Return code = -1
Testing /pci at 1f,2000/scsi at 1
No targets found
Selftest failed. Return code = -1
Testing /pci at 1f,4000/TSI,gfxp at 4
Data lines          -- passed
Address quick
-- passed
Data size           -- passed
Data bits           -- passed
Random
memory test  -- passed
Testing /pci at 1f,4000/scsi at 3,1
No targets found
Selftest
failed. Return code = -1
Testing /pci at 1f,4000/scsi at 3
Testing
/pci at 1f,4000/network at 1,1
Hme register test --- succeeded.
Internal loopback
test -- succeeded.
Transceiver check  -- Using Onboard Transceiver - Timeout
waiting for AutoNegoti
ation Status to be updated.
Timeout reading Link
status. Check cable and try again.
Timeout waiting for AutoNegotiation Status
to be updated.
Timeout reading Link status. Check cable and try again.
Timeout
waiting for AutoNegotiation Status to be updated.
Timeout reading Link status.
Check cable and try again.
AutoNegotiation Timeout.
Check Cable or Contact
your System Administrator.
Link Down.
failed
Selftest failed. Return code = -1
Testing /pci at 1f,4000/pci at 2/SUNW,qfe at 3,1
Hme register test --- succeeded.
Internal loopback test -- succeeded.
Transceiver check  -- Using Onboard
Transceiver - Timeout waiting for AutoNegoti
ation Status to be updated.
Timeout reading Link status. Check cable and try again.
Timeout waiting for
AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable
and try again.
Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
AutoNegotiation
Timeout.
Check Cable or Contact your System Administrator.
Link Down.
failed
Doing more loopback tests -- Did not receive expected loopback packet
failed
Selftest failed. Return code = 4294967295
Testing
/pci at 1f,4000/pci at 2/SUNW,qfe at 2,1
Hme register test --- succeeded.
Internal
loopback test -- succeeded.
Transceiver check  -- Using Onboard Transceiver -
Timeout waiting for AutoNegoti
ation Status to be updated.
Timeout reading
Link status. Check cable and try again.
Timeout waiting for AutoNegotiation
Status to be updated.
Timeout reading Link status. Check cable and try again.
Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link
status. Check cable and try again.
AutoNegotiation Timeout.
Check Cable or
Contact your System Administrator.
Link Down.
failed
Doing more loopback tests
-- Did not receive expected loopback packet
failed
Selftest failed. Return
code = 4294967295
Testing /pci at 1f,4000/pci at 2/SUNW,qfe at 1,1
Hme register test
--- succeeded.
Internal loopback test -- succeeded.
Transceiver check  --
Using Onboard Transceiver - Timeout waiting for AutoNegoti
ation Status to be
updated.
Timeout reading Link status. Check cable and try again.
Timeout
waiting for AutoNegotiation Status to be updated.
Timeout reading Link status.
Check cable and try again.
Timeout waiting for AutoNegotiation Status to be
updated.
Timeout reading Link status. Check cable and try again.
AutoNegotiation Timeout.
Check Cable or Contact your System Administrator.
Link Down.
failed
Doing more loopback tests -- Did not receive expected
loopback packet
failed
Selftest failed. Return code = 4294967295
Testing
/pci at 1f,4000/pci at 2/SUNW,qfe at 0,1
Hme register test --- succeeded.
Internal
loopback test -- succeeded.
Transceiver check  -- Using Onboard Transceiver -
Timeout waiting for AutoNegoti
ation Status to be updated.
Timeout reading
Link status. Check cable and try again.
Timeout waiting for AutoNegotiation
Status to be updated.
Timeout reading Link status. Check cable and try again.
Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link
status. Check cable and try again.
AutoNegotiation Timeout.
Check Cable or
Contact your System Administrator.
Link Down.
failed
Doing more loopback tests
-- Did not receive expected loopback packet
failed
Selftest failed. Return
code = 4294967295
Testing /pci at 1f,4000/ebus at 1/fdthree at 14,3023f0
Testing floppy
disk system.  A formatted disk should be in the drive.
Recalibrate failed.
The floppy drive is either missing,
improperly connected, or defective.
Selftest failed. Return code = -1



{0} ok




{0} ok
{0} ok
{0} ok
{0} ok
{0} ok
{0} ok
{0} ok

{0} ok boot

Boot device: net  File and args:

Using
Onboard Transceiver - Timeout waiting for AutoNegotiation Status to be
updated.

Timeout reading Link status. Check cable and try again.

Timeout
waiting for AutoNegotiation Status to be updated.

Timeout reading Link
status. Check cable and try again.
Timeout waiting for AutoNegotiation Status
to be updated.
Timeout reading Link status. Check cable and try again.
AutoNegotiation Timeout.
Check Cable or Contact your System Administrator.
Link Down.
Setting up Network Link and Speed.
Using Onboard Transceiver -
Timeout waiting for AutoNegotiation Status to be upd
ated.
Timeout reading
Link status. Check cable and try again.
Timeout waiting for AutoNegotiation
Status to be updated.
Timeout reading Link status. Check cable and try again.



More information about the sunmanagers mailing list