Solaris 10 u4, Sun blade 1000 and xvr-1000

[Fabio A. Miranda]

Hello,

I am using a Sun blade 1000, Solaris 10 update 4, with xvr-1000 driver
installed, using stream b (hd15), fbconfig -prconf can "see" the card
and recognize the video, fbconfig -stream b - port hd15 works OK, but
svc x11-server fails with errors (/var/dt/Xerrors):

ddxDriverInit: Cannot Allocate framebuffer memory

Fatal server error:
InitOutput: AddScreen failed for /dev/fb

XIO:  fatal IO error 146 (Connection refused) on X server ":0.0"
       after 0 requests (0 known processed) with 0 events remaining.
ddxDriverInit: Cannot Allocate framebuffer memory

Fatal server error:
InitOutput: AddScreen failed for /dev/fb

XIO:  fatal IO error 146 (Connection refused) on X server ":0.0"
       after 0 requests (0 known processed) with 0 events remaining.
ddxDriverInit: Cannot Allocate framebuffer memory

Fatal server error:
InitOutput: AddScreen failed for /dev/fb

XIO:  fatal IO error 146 (Connection refused) on X server ":0.0"
       after 0 requests (0 known processed) with 0 events remaining.
ddxDriverInit: Cannot Allocate framebuffer memory

Fatal server error:
InitOutput: AddScreen failed for /dev/fb

XIO:  fatal IO error 146 (Connection refused) on X server ":0.0"
       after 0 requests (0 known processed) with 0 events remaining.

Sun Dec 30 20:40:23 2007
error (pid 500): Server for display :0 can't be started.

In the syslog, this is reported:

Dec 30 19:54:04 nietzsche gfb: [ID 454097 kern.notice] NOTICE:
unrecognized ioctl 0x4677
Dec 30 19:54:06 nietzsche last message repeated 3 times
Dec 30 19:55:36 nietzsche gfb: [ID 709792 kern.warning] WARNING: gfb:
load ucode failed: commreg0 = cafe
Dec 30 19:55:40 nietzsche gfb: [ID 454097 kern.notice] NOTICE:
unrecognized ioctl 0x4677
Dec 30 19:56:43 nietzsche last message repeated 7 times

I can boot off the xvr-1000 and use it as the console, it works fine,
but when bringing up the X screen it fails.

Thanks alot for help, I really really appreciatte it, I don't know what
else to do to make this xvr-1000 using stream b, port hd15 to work.
Can anyone help me with this issue ? thanks,

I will summarize!!!!

thanks,

fabio.