cfgadm-PP900--Unknown condition

[imran reayat]

Hi managers,
   
  I am getting the b/m output for cfgadm cammand;state of configured and connected device is also uknown. which is a bit surprising for me . please have a look below.
  root at my1# cfgadm
Ap_Id                          Type         Receptacle   Occupant     Condition
c0                             scsi-bus     connected    configured   unknown
c1                             scsi-bus     connected    configured   unknown
c2                             scsi-bus     connected    configured   unknown
c3                             scsi-bus     connected    configured   unknown
c4                             scsi-bus     connected    unconfigured unknown
c5                             scsi-bus     connected    unconfigured unknown
c6                             scsi-bus     connected    unconfigured unknown
c7                             scsi-bus     connected    unconfigured unknown
pcipsy0:C0M00-PCI#slot01       pci-pci/hp   connected    configured   ok
pcipsy10:C0M01-PCI#slot06      unknown/hp   connected    configured   ok
pcipsy10:C0M01-PCI#slot07      unknown      empty        unconfigured unknown
pcipsy11:C0M01-PCI#slot05      ethernet/hp  connected    configured   ok
pcipsy1:C0M00-PCI#slot00       fibre/hp     connected    configured   ok
pcipsy2:C0M00-PCI#slot03       unknown/hp   connected    configured   ok
pcipsy2:C0M00-PCI#slot04       unknown/hp   connected    configured   ok
pcipsy3:C0M00-PCI#slot02       fibre/hp     connected    configured   ok
pcipsy4:C0M00-PCI#slot06       unknown/hp   connected    configured   ok
pcipsy4:C0M00-PCI#slot07       unknown      empty        unconfigured unknown
pcipsy5:C0M00-PCI#slot05       ethernet/hp  connected    configured   ok
pcipsy6:C0M01-PCI#slot01       pci-pci/hp   connected    configured   ok
pcipsy7:C0M01-PCI#slot00       fibre/hp     connected    configured   ok
pcipsy8:C0M01-PCI#slot03       unknown/hp   connected    configured   ok
pcipsy8:C0M01-PCI#slot04       unknown/hp   connected    configured   ok
pcipsy9:C0M01-PCI#slot02       fibre/hp     connected    configured   ok

  Please tell me what device these Ap_ID s represent and why is the condition for configured occupants "unknown" ?
   
  Regards,
  imran

 
---------------------------------
It's here! Your new message!
Get new email alerts with the free Yahoo! Toolbar.